1962-1965 Chevy Nova Rear Bumper Each bumper only weighs 3 pounds. Use the factory brackets or design your own. These are ready for paint with minimal prep time.
Chevy Nova Bumper 1962-1965, Rear
Search Results for: bumper
Camaro Fiberglass Front Bumper with Spoiler 1982-1992
* High quality fiberglass front bumper with spoiler
* Fits the 1982-1992 Camaro
* Eliminates sagging and cracking of the urethane stock bumper
* Hand laid fiberglass for a stronger, more durable, quality product
* A direct bolt-on fiberglass front bumper with spoiler
* Great for racers – eliminating all the weight from the support bracing
* Front bumper weighs 14 lbs.
* We use the highest grade materials
* Gray gel coat finish is perfect to sand, seal, and paint
* Minimal prep time
* Made in the U.S.A.
Great for racers–it only weighs 14 lbs!! It eliminates all the weight from the support bracing!
This fiberglass Camaro Front Bumper with Spoiler will enhance and improve your vehicle’s inherent styling. It’s been engineered with the utmost attention to detail; it complements your vehicle’s exterior design by giving it that outstanding, head-turning look you’ve been striving for.
This front bumper with spoiler fits the 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Camaro keeping the classic look in mind. The hand laid fiberglass rear bumper with spoiler is strong, durable, and best of all; it will bolt directly to your factory Camaro. This fiberglass front bumper with spoiler eliminates the sagging and cracking of the urethane stock bumper.
The Camaro Front Bumper with Spoiler is made from lightweight, durable fiberglass which means, it not only provides dependable service withstanding years of exposure to the elements, but also allows you to remove a considerable amount of weight from your car making it faster.
This bumper looks GREAT and save when you buy the front and rear bumpers together, no additional shipping costs for the rear bumper.
At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.
WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Camaro Fiberglass Front Bumper 1978-1981
- * High quality fiberglass Front Bumper
- *Fits the 1978, 1979, 1980 & 1981 Camaro
* Hand laid fiberglass for a stronger, more durable, quality product
* Will accept the 1978-1981 upper and lower grills
* We use the highest grade materials
* All molds are adapted from the original part
* Gray gel coat finish is perfect to sand, seal and paint
* Minimal prep time
* Gone is the “droop” on top and “sag” on the side
* Direct Bolt On
* Made in the U.S.A.
This fiberglass Camaro Front Bumper will enhance and improve your vehicle’s inherent styling. It’s been engineered with the utmost attention to detail; it complements your vehicle’s exterior design by giving it that outstanding, head-turning look you’ve been striving for. It fits 1978, 1979, 1980, and 1981 Camaro keeping the classic look in mind.
Vehicles endure many environmental exposures, whether its due to road hazards, a restoration, or an accident, whatever the cause, overtime your bumper may need to be replaced. This front bumper will be the perfect complement for your classic Camaro. The hand laid fiberglass bumper is strong, durable and best of all will bolt directly to your factory vehicle.
Gone is the “droop” on top and “sag” on the side. Our fiberglass front bumper is guaranteed to hold its shape and keep the lines true to make your ride stand out! This bumper not only looks GREAT, but is lightweight to give you a racing edge! It is made to receive all stock replacement hardware and has stock mounting locations.
Save on shipping when you buy the front and rear bumpers together.
At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.
WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
ONLY 1980/81 MODELS: THE COVER DOES NOT HAVE TABS FOR THE UPPER GRILL ATTACHMENT LIKE SOME ORIGINALS DID, THE LOWER CORNER MOUNTS CAN USE THE INNER REINFORCEMENTS W/ A SPACER- THE UPPERS WILL NEED A CUSTOM MADE ANGLE BRACKET TO MOUNT **
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Camaro Fiberglass Center Console, Universal
-
*High quality fiberglass
* Hand laid fiberglass for a stronger, more durable, quality product
* All molds are adapted from the original part
* Gray gel coat finish is perfect to sand, seal and paint
* Minimal prep time
* Fits: 1967-1992 Camaros
* Made in the U.S.A.
This fiberglass Camaro console should enhance and improve your vehicle’s inherent interior styling. The hand laid fiberglass bumper is strong, durable and best of all will bolt directly on to your factory vehicle.
At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something for your Camaro compared to other vehicles or sticking with the classic factory look the choice is yours.
WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
HERE, MADE IN AMERICA means something.
Corvette Front End 1968-1982, Monza Non-Tilt
MONZA NON TILT FRONT END FOR 1968-1982 CORVETTE
- Complete door to door front end
- High quality fiberglass
- Labor saving one piece construction
- Distinctive Look And Very Functional
- Monza Style Headlights With Plexiglass Covers
- Finest resins, 3 layers of 1.5 oz mat, 21 mils soft sanding gel coat
- Our hand rolled process is stronger and free of bubbles and waves
- Time to turn that C-3 into a custom ride
- Use 1973-74 Grilles & 1973-79 Side Marker Lights
- Proper reinforcements provide long term durability
- Precision trimming minimizes prep
- Gray gel coat finish is perfect to sand, seal and paint
- Premium quality you can trust
- Made in the USA
Time to turn that C-3 into a custom ride with the 1 piece Corvette Monza Non-tilt Front End. This is a complete door to door front end and includes the 73-74 style front bumper, head lights and Plexiglas kit. It will fit model years 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981,& 1982.
This fiberglass Corvette Monza Non-tilt front end will improve and accentuate your vehicle’s styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s inner design, giving it that outstanding look every Corvette owner craves.
We have the experts to help with this big project.
The hand laid fiberglass Corvette front end is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.
Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette front end looks great and will add originality, style and attitude to your car!
At Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.
Ships via freight carrier to your business or residence.
We make everything we sell & sell everything we make
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Corvette Quarter Panel, Left, Wide Body, Convertible, Z06/ZR-1/GrandSport, 2005-2013
- High quality fiberglass quarter panels
- Fits 2005-2013 Corvette
- Hand laid fiberglass for stronger, more durable, quality product
- Direct bolt on
- Gray gel-coat finish is perfect to sand, seal, and paint
- Minimal prep time
- Made in the U.S.A.
2005-2013 Chevy Corvette Rear Quarter panels for the New Z-06 high performance appearance; they are factory Bolt-On, there is no additional hardware required.
No need for larger wheels and tires or inner components.
The factory break cooler duct for the Z-06 is now available without all the extra expense.
These go well with our Z-06 Appearance Front Bumper (Stock Bolt-On), which is sold by Stinger Fiberglass.
The fiberglass Corvette wide body quarter panel will improve and accentuate your vehicle’s new styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.
The hand laid fiberglass wide body quarter panel is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.
Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette wide body quarter panel will look great and will add originality, style and attitude to your car!
At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.
We make everything we sell & sell everything we make
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Corvette Front End 1980-1982
- High quality fiberglass Corvette Front End
- Fits the 1980-1982
- Complete with header bar and nose bar installed
- Hand laid fiberglass for a stronger, more durable, quality product
- Finest resins, 3 layers of 1.5 oz mat, 21 mils soft sanding gel coat
- Proper reinforcements provide long term durability
- Direct bolt on
- Gray gel coat finish is perfect to sand, seal, and paint
- Minimal prep time
- Made in the U.S.A.
The fiberglass Corvette front end will improve and accentuate your vehicle’s original styling. It has been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this sleek, detailed, Corvette part complements your vehicle’s exterior design, giving it that outstanding look every Corvette owner craves.
The hand laid fiberglass front end is strong and durable. Each Stinger Fiberglass mold has been painstakingly reproduced from the original GM body parts and has heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Hand lamination is used to make every part here at Stinger Fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.
Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette front end will look great and will add originality, style and attitude to your car!
At American Sports Car/Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles, or sticking with the classic factory look, the choice is yours.
We make everything we sell & sell everything we make
Note: Order a set of inner skirts and front bumper, they can ship for free with your front end !!! Call us for details.
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Corvette Front End 1969-1982, Daytona
TIME TO GET YOUR GROVE BACK! DAYTONA FRONT END FOR 1968-1982 CORVETTE
- High quality fiberglass
- Fits the 1968-1982 Corvette
- Hand laid fiberglass for stronger, more durable, quality produce
- Precision Fit – Heavily Reinforced Molds
- Finest Resins, 3 Layers Of 1.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
- Includes molded-in header bar and headlight mounting end plates
- Proper Reinforcements Provide Long Term Durability
- Save Time & Money – Precision Trimming Minimizes Prep
- Made In The USA
- Please allow extra time for manufacturing and delivery
We also have the additional parts to complete your project:
- Daytona Hood
- door extensions
- rear quarters
- lower rocker panels
- rear bumper
This fiberglass Corvette front end will improve and accentuate your vehicle’s original styling. It’s been engineered and made by experienced craftsman who pay close attention to detail. These men and women take pride in the products they build to ensure this Corvette sleek, detailed floor pan complements your vehicle’s inner design. Giving it that outstanding look every Corvette owner craves.
The hand laid fiberglass Corvette front end is strong and durable. The gray gel coat finish is ready for sanding, sealing and paint which means minimal prep time.
Conditions out of our control are rough on vehicles, so we use high quality materials to withstand years of exposure to the elements. This Corvette front end looks great and will add originality to your car!
At Stinger Fiberglass Designs we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.
Ships via truck freight carrier to your business or residence.
We make everything we sell & sell everything we make and have the experts to help!
Please allow extra time for manufacturing. Each front end is built upon order placement.
NOTE: Fiberglass Panels Require Fitting, Trimming, Shimming, And Special Finishing. Unless You Are Experienced In Working With Fiberglass, Stinger Fiberglass Recommends Using A Qualified Body Shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Corvette Body Kit Eckler Can-Am 1968-1982
Complete body kit for your 1968-1982 Corvette
After countless requests, we have brought back the original CAN-AM Wide Body Kit built by Ecklers back in the early seventies…NOW; we have made the installation for this kit much easier!
*High quality fiberglass Corvette Can-Am Wide Body kit
* Fits the 1968-1982 Corvette
* Hand laid fiberglass for a stronger, more durable, quality product
* Direct bolt on
* Gray gel coat finish is perfect to sand, seal, and paint
* Minimal prep time
* Made in the U.S.A.
The kit includes:
- Can-Am one-piece front end (door to door) with bumper molded in and headlights installed
- The rear end is one piece and self-alignment to make it easy to install included with the door caps
- Door Cap – drivers side
- Door Cap – passenger side
The Classic Muscle Car!! We are ready to help you with your Corvette Restoration project.
This classy front end fits the 1968-1982 Corvette. The hand laid fiberglass is strong, durable and best of all will bolt directly on to your Corvette for easy installation. It’s light weight for superior performance. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.
At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.
Shipped via truck freight to your home or business. Please allow extra time for manufacturing. Each kit is built upon order placement.
WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.
COMBINED CANCER/BIRTH DEFECT: WARNING: This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov
Camaro Front Spoiler Hugger 1978-1981
* High quality fiberglass Camaro Front Spoiler, Hugger
* Fits the 1978-1981 Camaro
* Molded off of an original Mitchell “Hugger”
* Fits over the existing Z-28 Front Spoiler
* Hand laid fiberglass for a stronger, more durable, quality product
* Gray gel coat finish is perfect to sand, seal, and paint
* Minimal prep time
* Made in the U.S.A.
This fiberglass Camaro Front Spoiler, Hugger will both improve and accentuate your car’s style. It’s been engineered and made by experienced craftsman. They take pride in the products they build to ensure this front spoiler, hugger complements your vehicle’s exterior design by giving it that outstanding, head-turning look every classic car enthusiast craves.
It fits the 1978, 1979, 1980, and 1981 Camaro keeping the classic look in mind, yet allowing for originality, as well as, sleeker shapes, lines, and curves. The hand laid fiberglass front spoiler, hugger is strong, durable and best of all it fits over the existing Z-28 front spoiler. It has been molded off an original “Mitchell Hugger”. Use this spoiler with our bumper cover and get the “look”!
This Camaro Front Spoiler, Hugger is guaranteed to hold its shape and keep the lines true to make your ride stand out! Plus, this spoiler, hugger is made from lightweight, durable fiberglass. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time. It not only provides dependable service, but exceptional resistance to the elements. It’s light eliminating all unnecessary weight from your factory steel parts, providing better performance and giving you the racer’s edge you’ve been longing for!
At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.
WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
HERE, MADE IN AMERICA means something.
Honestly, you can’t ask for more than a Quality hand built American made part!
NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.