Search Results for: hood

Chevy Vega Hood 1970-1977, Cowl, 3″, Bolt On

Chevrolet Vega Fits 1970-77 3″ Cowl Vega hood Bolt on application, under the cowl is open for clearance.

*High quality fiberglass Vega Cowl Hood

* Fits the 1970-1977

* Hand laid fiberglass for a stronger, more durable, quality product

* Direct bolt on

* Gray gel coat finish is perfect to sand, seal, and paint

* Minimal prep time

* Made in the U.S.A.

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Chevy Vega Hood 1970-1977, Cowl, 3″, Lift Off

Chevrolet Vega Fits 1970-77 3Š— Cowl Vega hood Lift off application. Under the cowl is open for clearance.

*High quality fiberglass Vega Cowl Hood

* Fits the 1970-1977

* Hand laid fiberglass for a stronger, more durable, quality product

* Direct bolt on

* Gray gel coat finish is perfect to sand, seal, and paint

* Minimal prep time

* Made in the U.S.A.

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

Ford Mustang Hood 1964-1966, AFX Tear Drop

  • High quality fiberglass AFX style, teardrop hood
  • Fits the 1964-1966 years
  • This is the correct LARGE “tear-drop”; pin it at the front for the “Factory” racer look.
  • Hand laid fiberglass for a stronger, more durable, quality product
  • It bolts on to the factory hinges for easy installation
  • Unequalled Finish – Finest Resins, 3 Layers Of 1.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
  • Premium Quality – Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
  • Superior Strength – Proper Reinforcements Provide Long Term Durability
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Minimal prep time
  • Made in the U.S.A.

Looking for that racy, sporty hood?  Well, you found it!

This Mustang AFX hood has been engineered and made by experienced craftsman who take pride in the products they build to ensure this hood complements your vehicle’s exterior design by giving it that outstanding, head-turning look you’ve been striving for.

Conditions out of our control can be rough on hoods; we use high quality materials to withstand years of exposure to the elements. The fiberglass material provides exceptional resistance to harsh elements which results in many years of hassle-free service even under challenging conditions. This AFX teardrop Hood looks great and will add originality and style to your car! Plus, it’s fiberglass which means its light eliminating all the weight from your factory hood, providing superior performance and giving you the racer’s edge you’ve always desired!

This Mustang AFX hood helps to keep that classic look in mind and yet allowing for originality, as well as sleeker shapes, lines, and curves. This Mustang AFX teardrop hood will take your car’s classic lines and improve and accentuate its style.

At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.

WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!

NOTE: Fiberglass panels require fitting, trimming, shimming, and special finishing. Unless you are experienced in working with fiberglass, we recommend using a qualified body shop. 

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

 

 

Dodge Charger Hood 1971-1974, Power Bulge, Bolt On

1971-74 Charger Power Bulge Hood – Bolt On This is a direct bolt on for your 1971-74 charger (has the vent style of a ’71). Weight 37 LBS Ships truck freight

 

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Dodge Charger Hood 1971-1974, Power Bulge, Lift Off

1971-74 Charger Power Bulge Hood – Lift Off This is a lift of version for your 1971-74 charger (has the vent style of a ’71) Weight 24 lbs. Ships truck freight

 

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Ford Mustang Hood 1967-1968, Shelby

SHELBY! SHLEBY! SHELBY!

  • High quality fiberglass Shelby style hood
  • Fits the 1967-1968 Mustang
  • Hand laid fiberglass for a stronger, more durable, quality product
  • Hood is longer than the stook hood (requires our Eleanor/Shelby header panel)
  • Attaches to the hinge pins on the front
  • Unequalled Finish – Finest Resins, 3 Layers Of 1.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
  • Premium Quality – Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
  • Superior Strength – Proper Reinforcements Provide Long Term Durability
  • Save Time & Money – Precision Trimming Minimizes Prep
  • Gray gel coat finish is perfect to sand, seal, and paint
  •  Minimal prep time
  • Made in the U.S.A.

Gone in Sixty Seconds is one of the most iconic movie remakes ever made. Now is your chance to reproduce the beautiful lines of the Eleanor Mustang on your own 1967-1968 Mustang with this fiberglass hood.

This is a fiberglass reproduction of the 1967 Mustang Shelby style hood, ready to add class to your Mustang!  No matter you go, you will riding in style with heads turning. It’s been engineered and made by experienced craftsman who pay close attention to detail.  These men and women take pride in the products they build to ensure this Mustang Shelby hood complements your vehicle’s outer design. Giving it that beauiful look every Mustang owner craves.

The Shelby Hood helps keep the classic look in mind and yet allowing for originality, as well as sleeker shapes, lines, and curves

It will imrpove your car’s classic lines to improve and accentuate its style

The fiberglass hood provides exceptional resistance to harsh elements which results in many years of hassle-free service even under challenging conditions.

At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.

WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!

HERE, MADE IN AMERICA means something.

It will attach to your hinges pin on in the front. This hood is longer than the stock hood and will require our Eleanor/Shelby Header Panel ($350.0) found under the Eleanor Kit. Will fit model years 1967, 1968

 

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Oldsmobile Cutlass Hood 1971-1972, 442

This is a fiberglass reproduction of the factory 442 hood for the 1971-1972 Oldsmobile Cutlass. It is fully functional when used with a ram air box. It will bolt on directly to your factory hinges. It will accept all stock chrome bezels. Just sand, prime and paint! Stock hood weighs approximately 82 LBS, whereas our fiberglass hood weighs approximately 41 LBS. Ships truck freight.

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Pontiac Trans Am/Firebird Hood 1998-2002, Ram Air, Cold Air

1998-2002 Pontiac Trans Am or Pontiac Firebird Cold Air Ram Air Hood This is a front Ram Air Hood with 4 Functional Heat Extractors. This is a direct bolt-on hood.

 

 

NOTE:  Fiberglass panels require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

Pontiac parts fitment may require additional time and experience.  All parts have been molded from an original; however, the Pontiac’s tend to be a little more difficult.    

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Camaro L-88 Hood 1970-1981

* High quality fiberglass L-88 hood
* Fits the 1970-1981 Camaro
* Hand laid fiberglass for a stronger, more durable, quality product
* Direct Bolt On
* Gray gel coat finish is perfect to sand, seal, and paint
* Minimal prep time
* Made in the U.S.A.
* 2 1/2″ height clearance

This fiberglass Camaro L-88 Hood will enhance and improve your vehicle’s distinctive styling. It’s been engineered with the utmost attention to detail; it will complement your vehicle’s exterior design by giving it that outstanding, head-turning look you’ve been striving for.

It fits the 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981 Camaro keeping the classic look in mind. The hand laid fiberglass L-88 hood is strong, durable and best of all will bolt directly on to your car for easy installation and made by experienced craftsman. The gray gel coat finish is perfect to sand, seal and paint which means minimal prep time.

Conditions out of our control can be rough on hoods, whether its road hazards, an accident, or a restoration you’ve been longing for, whatever the cause or reason, we use high quality materials to withstand years of exposure to the elements. This Camaro L-88 Hood is guaranteed to hold its shape and keep the lines true to make your ride stand out! Plus, its fiberglass which means this hood is light eliminating all the weight from your factory hood, providing better performance and giving you the racer’s edge you’ve always desired!

At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.

WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!
HERE, MADE IN AMERICA means something.

You can’t ask for more than a Quality hand built American made part!

 

NOTE:  Fiberglass parts require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov

Ford Fairlane Hood 1963-1964, Thunderbolt, Bolt On

 

  • High quality fiberglass hood
  • Fits the 1963-1964 Ford Fairlane
  • Hand laid fiberglass for a stronger, more durable, quality product
  •  Great classic style 
  • Unequalled Finish – Finest Resins, 3 Layers Of 1.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
  • Premium Quality – Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
  • Superior Strength – Proper Reinforcements Provide Long Term Durability
  • Save Time & Money – Precision Trimming Minimizes Prep
  • MADE IN THE U.S.A.
  • Direct bolt on
  • Gray gel coat finish is perfect to sand, seal, and paint
  • Made in the U.S.A.

Conditions out of our control can be rough on classic cars.  We use high quality materials to withstand years of exposure to the elements. This sweet hood looks great and will add class and style to your car! Plus, it’s fiberglass which means its light, eliminating all the weight from your factory hood, providing superior performance and giving you the racer’s edge you’ve always desired!

Quality hand laid fiberglass teardrop style bubble hoods are now available for many Fords, including Fairlane’s. These high quality parts are manufactured to capture the look and function of the original Ford lightweight hoods, and allow clearance for significant high-rise manifold/carburetor setups.  If you plan to use just pins, this is a easy installation.  If original hardware is desired they are very adaptable for the various configurations.

At American Sports Car we make fiberglass products for the classic car enthusiast and we use superior materials. Whether you are searching for something unique compared to other vehicles or sticking with the classic factory look the choice is yours.

WE BUILD EVERYTHING WE SELL AND SELL EVERYTHING WE BUILD!

HERE, MADE IN AMERICA means something.

Accepts stock hinges.  Optional hood pins can be used. Hood weighs approximately 27 LBS.

 

 

 

NOTE:  Fiberglass parts require fitting, trimming, shimming, and special finishing.  Unless you are experienced in working with fiberglass, we recommend using a qualified body shop.

COMBINED CANCER/BIRTH DEFECT: WARNING:  This product can expose you to chemicals including glass wool fibers (INHALEABLE & BIOPERSISTENT) which is known in the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information see www.p65warnings.ca.gov